China Clean Workbench SW-CJ-1FD - Sterile & Dust-Free Solutions from Trusted Suppliers and Factory
Structure
The purification workbench is composed of several major components such as a box, a fan, a high-efficiency filter, and an operating switch. The box body is made of cold plate, etc., the surface is spray-painted, and the work surface is made of stainless steel. The purification unit adopts a fan system with adjustable air volume. By adjusting the working status of the fan, the average wind speed in the clean working area can be maintained within the rated range, and the service life of the high-efficiency filter is effectively extended.
Working Principle
The air passes through the primary filter, is pressed into the static pressure box by the centrifugal fan, and is filtered by the high-efficiency filter before being blown out from the air outlet surface to form a clean air flow. The clean air flow flows through the area that needs to be purified at a uniform cross-sectional wind speed, and the air in this area is The dust is taken away, thus forming a highly clean working environment.
Install and Use
This workbench should be placed in a workroom with a relatively clean environment (preferably in a primary clean room with a level of 100,000 or 300,000). Plug in the power and turn it on according to the function shown on the control panel. Before starting up, the working area and outer casing of the purification table should be carefully cleaned to remove dust on the surface. Normal operation can be carried out ten minutes after starting up.
Maintain
-
1According to the actual usage, remove the primary filter and clean it regularly. The cleaning cycle is generally 3-6 months. (If it is not cleaned for a long time, dust accumulation will affect the insufficient air intake and reduce the cleaning effect.)
-
2When the ideal cross-sectional wind speed still cannot be achieved after normal replacement or cleaning of the primary filter air filter, the working voltage of the fan should be adjusted to achieve the ideal uniform wind speed.
-
3Generally, after eighteen years of use, when the fan operating voltage is adjusted to the highest point and still cannot reach the ideal wind speed, it means that the high-efficiency filter has too much dust (the filter holes on the filter material have been basically blocked, so it must be updated in time) , the general service life of high-efficiency air filters is eighteen months.
-
4When replacing the high-efficiency air filter, you should pay attention to whether the model, specifications and dimensions are correct (original manufacturer configuration), install it according to the arrow wind direction, and pay attention to the surrounding seal of the filter to ensure that there is absolutely no leakage.
Frequently Asked Questions
Q
What are the main components of the purification workbench?
The purification workbench consists of several major components, including a box (made of cold plate with a spray-painted surface), a fan system with adjustable air volume, a high-efficiency filter, an operating switch, and a stainless steel work surface.
Q
How does the purification workbench achieve a clean working environment?
Air is drawn through the primary filter and pressed into the static pressure box by a centrifugal fan. It is then filtered by the high-efficiency filter before being blown out uniformly. This clean airflow carries away dust in the work area to create a highly clean environment.
Q
Where should the purification workbench be installed and how is it started?
It should be placed in a clean environment, preferably a primary clean room of level 100,000 or 300,000. Before startup, clean the working area and casing to remove dust. Plug it in, turn it on via the control panel, and wait ten minutes before starting normal operation.
Q
How often should the primary filter be cleaned?
The primary filter should be removed and cleaned regularly, with a general cycle of 3 to 6 months depending on actual usage. Neglecting cleaning can cause dust accumulation, leading to insufficient air intake and reduced cleaning efficiency.
Q
What should be done if the wind speed is still low after cleaning the primary filter?
If the ideal uniform wind speed cannot be achieved after cleaning or replacing the primary filter, the working voltage of the fan should be adjusted to increase the air volume and restore the proper wind speed.
Q
When does the high-efficiency air filter need to be replaced?
The high-efficiency filter needs replacement when the fan voltage is at its maximum but the ideal wind speed still cannot be reached, indicating the filter is blocked. The general service life of the high-efficiency filter is eighteen months.